NoAudiophile DSP Corrections for the Micca MB42x/MB42x Mark II & III/PB42x

You can use Equalizer APO for PC to apply this setting to your Windows PC at a system level. For Mac you can try this out choosing the parametric EQ option and entering the filters by hand. If you are a Linux user and the chops to prove it, this is a good solution for System Wide DSP.

Micca MB 42x/PB42x MK-III - 1/11/2016

This is for the Mark III, If you bought your speakers after September 2015 this is the correction you want. I don't have a full review of this speaker, but it is a marked improvement in every way over the MKII. The speaker loses about 6dB perceived volume with the correction, and cuts the over done upper midrange/treble a little bit and adds some bass boost to the bottom end of the speaker.

Click the image to download the correction file.

Micca MB 42x/PB42x - 3/14/2015

This is for the Mark II, or plastic port version of the speaker. It loses about 5dB perceived volume, and makes solid improvements on a pretty good speaker.

Click the image to download the correction file.

Micca MB 42x - 10/14/2013

This is for the Mark I, or cardboard port version of the speaker. It loses about 3dB perceived volume, and takes the speaker from great to amazing.

Click the image to download the correction file.

Give feedback on these corrections here at the noaudiophile subreddit



Other content you may like: